Aurora Visio Studio TOP » Filter Reference » Camera Support » Allied Vision Technologies » Vimba_SetIntegerParameter
Basic| Module: | ThirdParty |
|---|
Sets a parameter of type Integer into an Allied Vision camera.
| Name | Type | Description | |
|---|---|---|---|
 |
inDeviceID | String* | Device identifying address |
|
inParameterName | String | Name of feature parameter |
|
inValue | Integer | New value to be set into device parameter |
Remarks
Camera driver software
This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Vimba SDK software.
Vimba SDK can be downloaded from the following website: https://www.alliedvision.com/en/products/software.html
To verify the driver installation, you can run Vimba Viewer. If the camera was detected and you can see the view from the camera, you can use Vimba SDK in Aurora Vision Studio.
Recommended Vimba SDK version for Aurora Vision Studio usage is 6.0.
Camera identification
When there is only one Allied Vision camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.
inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.
Complexity Level
This filter is available on Basic Complexity Level.
Disabled in Lite Edition
Filter Group
This filter is member of Vimba_SetParameter filter group.