Start » Filter Reference » Camera Support » Ensenso » Ensenso_StartAcquisition
Module: | ThirdParty |
---|
Starts capturing data from an Ensenso camera.
Applications
Name | Type | Description | |
---|---|---|---|
inDevices | EnsensoCameraInformationArray | Structures identifying devices | |
inParametersFile | File* | Initial global parameters | |
inSoftwareTriggered | Bool | When true, capture will wait for GenerateSoftwareTrigger |
Remarks
Initial parameters
Initial parameters are only set during capture start. To change parameters either restart the stream, or use appropriate Set/Get filters.
Camera identification
When there is only one Ensenso camera connected, the field inDevices can be set to Auto. In this situation, the first available camera will be used.
inDevices can be used to pick one or many of multiple cameras connected to the computer.
Camera driver software
This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install Ensenso SDK software, and uEye driver (same as in IDS camera filters)
Ensenso SDK can be downloaded from the following website: https://www.ensenso.com/support/sdk-download/
uEye driver can be downloaded from the following website: https://en.ids-imaging.com/download-ueye.html
Recommended Ensenso SDK version for Aurora Vision Studio usage is 2.2 and uEye driver 4.90.
Parallel execution
Complexity Level
This filter is available on Advanced Complexity Level.
Disabled in Lite Edition
See Also
- Ensenso_LoadSettings – Loads parameter data from a file.
- Ensenso_LoadCalibration – Loads calibration data from a file.
- Ensenso_LoadGlobalParameters – Loads global parameters from a file.