Aurora Visio Studio TOP » Filter Reference » Hardware Support » Advantech » DAQNavi_GetDigitalInterrupt
Basic| Module: | ThirdParty |
|---|
Returns interrupt values.
| Name | Type | Range | Description | |
|---|---|---|---|---|
 |
inDeviceID | String* | Description or index of device | |
|
inSrcChannel | Integer | 0 - + |
Channel number which snap event occurs |
|
inPort | Integer | 0 - + |
Port number to scan when interrupt occurred |
 |
outPortValues | IntegerArray | Port values scanned when interrupt occurred | |
Remarks
Board driver software
This filter is intended to cooperate with digital I/O cards using its vendor SDK. To be able to connect to a card it is required to install DAQNavi SDK software. Currently Aurora Vision Studio requires DAQNavi SDK version 4.1.3.
DAQNavi SDK can be downloaded from the following website: https://www.advantech.com.
Device identification
When there is only one device connected to computer, inDeviceID field can be set to Auto. In this situation first available device will be found and connected.
inDeviceID can be used to pick one of multiple devices connected to computer. Set this field to Device Description (for example "DemoDevice, BID#000"), or to Device Number(for example "0"). Both parameters should be available in Advantech Navigator.
Complexity Level
This filter is available on Basic Complexity Level.
Disabled in Lite Edition
See Also
- DAQNavi_SetPortDirection – Sets the port direction (input or output).
- DAQNavi_GetDigitalInput – Returns value from digital input.
- DAQNavi_GetDigitalInputs – Returns values from all digital inputs.
- DAQNavi_InitInterrupts – Initializes interrupts.
- DAQNavi_SetDigitalOutput – Sets digital output value.