Start » Filter Reference » Hardware Support » Hikrobot » Hikrobot_SetOutputParameters

Hikrobot_SetOutputParameters

Module:	ThirdParty

Set output parameters.

Name	Type	Range	Description
inDeviceID	Integer *	1 -	Device identification number - COM port number.
inPortNumber	HikrobotPortNumber		Device port number reference.
inMode	HikrobotPatternOut		Output mode: Single pulse or PWM.
inPulseWidth	Integer	1 - 65535	PWM pulse width [ms].
inPulsePeriod	Integer	1 - 65535	PWM pulse period [ms].
inPulseDuration	Integer	1 - 65535	PWM pulse duration [ms].
inLevel	Bool		Effective level (there may be reversed logic).

Remarks

This filter allows to set the output parameters of a specific port of the device. The parameters are output mode (Single pulse or PWM), PWM pulse width, PWM pulse period, PWM pulse duration and effective level.

I/O device driver software

This filter is intended to cooperate with a device using its vendor SDK. To be able to connect to a device, it is required to install Hikrobot VC4000 SDK.

Add DLL path to system environment variable is required.

In some computer models, digital inputs and outputs may operate in reverse logic (true is low signal level). Please check your device.

Recommended Hikrobot VC4000 SDK version for Aurora Vision Studio usage is 1.2.0.

Device identification

inDeviceID field can be used to pick one of multiple I/Os connected to computer. DeviceID can be set to:

COM port number - the number of the COM port used to communicate with the I/O.

Complexity Level

This filter is available on Advanced Complexity Level.

Disabled in Lite Edition

This filter is disabled in Lite Edition. It is available only in full, Aurora Vision Studio Professional version.