Start » Filter Reference » Camera Support » IDS » IDS_SetParameters
Module: | ThirdParty |
---|
Sets camera parameters.
Name | Type | Range | Description | |
---|---|---|---|---|
inDeviceID | String* | Device serial number or user definable camera ID | ||
inAoi | Box* | Required fragment of image to stream | ||
inFrameRate | Real* | 0.1 - 400.0 | Frame rate | |
inExposureTime | Real* | 0.0 - | Exposure time in microseconds | |
inHorizontalBinning | IDSBinning* | Horizontal binning | ||
inVerticalBinning | IDSBinning* | Vertical binning | ||
inMirror | IDSMirror* | Mirror effect | ||
inAutoBlackLevel | Bool* | Enable auto black level | ||
inBlackLevelOffset | Integer* | 0 - | Black level offset | |
inGamma | Integer* | 1 - 1000 | Set gamma value | |
inGainBoost | Bool* | Set gain boost mode | ||
inGainMaster | Integer* | 0 - 100 | Set gain master value | |
inGainRed | Integer* | 0 - 100 | Set gain red value | |
inGainGreen | Integer* | 0 - 100 | Set gain green value | |
inGainBlue | Integer* | 0 - 100 | Set gain blue value |
Remarks
Camera driver software
This filter is intended to cooperate with cameras using their vendor's SDK. In order to connect with the camera, it is required to install IDS SDK software.
IDS SDK can be downloaded from the following website: https://en.ids-imaging.com/download-ueye.html
To verify the driver installation, you can run IDS Camera Manager. If the camera was detected and you can see the view from the camera, you can use IDS SDK in Aurora Vision Studio.
Recommended IDS SDK version for Aurora Vision Studio usage is 4.94.
Camera identification
When there is only one IDS camera connected, the field inDeviceID can be set to Auto. In this situation, the first available camera will be used.
inDeviceID can be used to pick one of multiple cameras connected to the computer. inDeviceID should be set to camera ID.
Source code
In Professional edition this filter is open source. You can use this filter as reference when implementing support for your specific hardware. You can also modify this filter and add some additional functionality.
The source code is located in the directory:
Public Documents\Aurora Vision Studio 4.x Professional\Sources\UserFilters\IDS
Typically it is:
C:\Users\Public Documents\Aurora Vision Studio 4.x Professional\Sources\UserFilters\IDS
Parallel execution
Complexity Level
This filter is available on Basic Complexity Level.
See Also
- IDS_GrabImage – Captures an image from an IDS camera.
- IDS_GrabImage_WithTimeout – Captures an image from an IDS camera.
- IDS_StartAcquisition – Initialize2s and starts image acquisition in a camera.
- IDS_ForceTrigger – Forces software-controlled captures of an image while a capturing process triggered by hardware is in progress.